籃式不銹鋼濾芯有哪些規格？不銹鋼濾芯有多種加工產品，錐形的，籃式的,圓筒柱的，片狀的等等。其中，提籃式過濾筒是比較常見的一種。

     提籃式不銹鋼濾芯也叫籃式過濾器濾芯，因形狀像籃子而得名。用于管道中液體雜物過濾，當流體進入有一定規格的過濾網的濾桶后，雜質被阻隔，而清潔的濾液則由過濾器出口排出，提籃式濾芯遠遠超過Ｙ型、Ｔ型過濾器面積，過濾精度最佳。將提籃式濾芯串裝在泵的入口或系統管線的其他部位，既可以延長泵和其他設備的使用年限，又能保證整個系統的安全。

     提籃式濾芯使用的不銹鋼網有編織不銹鋼網和沖孔不銹鋼網兩種，選擇時要根據過濾產品的需要來定。不銹鋼濾芯成圓形一般根據用戶的要求，廠家再采取相應的方式。滾壓，是最簡單而且最常用的方式，效率高，出產品快，用于各自編織網濾芯骨架及厚度0.3-2mm之間的不銹鋼沖孔網，需要調圓。壓圓，根據濾芯骨架直徑的大小做好模具，模具的內徑是骨架外徑的大小，在壓力機或折彎?rùn)C(jī)上經加壓而成，板厚適用于1-4mm之間。咬合，是一種專業的濾芯設備，主要用于不銹鋼薄板濾芯骨架、鋼板網骨架、及鋁板網骨架等。螺旋焊接，只用于不銹鋼板圓孔網濾芯，厚度一般要求較厚，氬弧焊焊接。

     安平華納專業加工定做各種規格不銹鋼濾芯，歡迎來電或來圖加工定做。

What are the specifications of basket stainless steel filter element? There are a variety of stainless steel filter processing products, conical, basket, cylinder column, sheet and so on. Among them, the basket type filter cylinder is a more common one.

Basket type stainless steel filter element is also called basket type filter, named for its shape like a basket. Used for liquid debris in the pipeline filtration, when the fluid into a certain specification of the filter screen after the filter barrel, impurities are blocked, and the clean filtrate is discharged from the filter outlet, basket type filter element is far more than the Y type, T type filter area, the best filtration accuracy. The basket type filter is installed in the pump inlet or other parts of the system pipeline, which can not only prolong the service life of the pump and other equipment, but also ensure the safety of the whole system.

Basket type filter element using stainless steel mesh has two kinds of woven stainless steel mesh and punching stainless steel mesh, the choice should be based on the needs of the filter product. Stainless steel filter into round generally according to the requirements of users, manufacturers to take the corresponding way. Rolling, is the simplest and most commonly used way, high efficiency, fast product, used for their woven mesh filter core skeleton and thickness between 0.3-2mm stainless steel punching mesh, need to adjust round. Press round, according to the size of the filter core skeleton diameter mold, mold inner diameter is the size of the skeleton outer diameter, in the press or bending machine by pressure, plate thickness is suitable for 1-4mm. Occlusal, is a professional filter equipment, mainly used for stainless steel plate filter core frame, steel plate mesh frame, and aluminum plate mesh frame, etc. Spiral welding, only used for stainless steel plate round hole mesh filter, thickness is generally required to be thick, argon arc welding.

Anping Huana professional processing customized various specifications of stainless steel filter, welcome to call or map processing customized.